 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Oven Controlled Crystal Oscillator OX-500 Preliminary Features 4-Pin package Fast Warm-up TCXO Replacement for better short term stability Typical Applications Base Stations Test Equipment Synthesizers Military Communication Equipment Frequency Range Standard Frequencies 7 MHz - 40 MHz 20 MHz (SC); 13 MHz (AT) Frequency stabilities1 [AT Cut Crystal-Standard- 7 to 20 MHz] Parameter vs. operating temperature range (Referenced to +25C) Min -100 -250 -250 Typ Max +100 +250 +250 Units ppb ppb ppb Units ppm ppb ppb ppb ppm minutes Operating temperature range -20 ... +70C -20 ... +70C -40... +85C Condition at time of shipment, nominal EFC VS 5% static Load 5% static after 30 days of operation after 30 days of operation to 200ppb of final frequency (1 hour reading) @ +25C Parameter Initial tolerance vs. supply voltage change vs. load change vs. aging vs aging / day / year Min -0.5 -40 -40 -20 -1 Typ Max +0.5 +40 +40 +20 +1 2 Warm-up Time htttp://www.vectron.com Vectron International*267 LowellRoad, Hudson, New Hampshire 03051*Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG * Landstrae, 74924 Neckarbischofsheim, Germany * Tel: +49 7268 801 100 OX-500 page: 1/5 Options5 Frequency stabilities1 [SC Cut Crystal-Option- 20 to 40 MHz] Parameter vs. operating temperature range (Referenced to +25C) Min -25 -50 Typ Max +25 +50 Units ppb ppb Operating temperature range -20 ... +70C -40... +85C Parameter Initial tolerance vs. supply voltage change vs. load change vs. aging vs aging / day / year Min -0.2 -20 -20 -5.0 -100 Typ Max +0.2 +20 +20 +5.0 +100 2 Units ppm ppb ppb ppb ppb minutes Condition at time of shipment, nominal EFC VS 5% static Load 5% static after 30 days of operation 60MHz; after 30 days of operation Warm-up Time to 100ppb of final frequency (1 hour reading) @ +25C Supply Voltage (Vs) Parameter Supply voltage [Standard] Power consumption Min 3.135 Typ 3.3 Max 3.465 2.0 0.65 Units VDC Watts Watts Condition during warm-up steady state @ +25C RF Output Parameter Signal [Standard] Load Signal Level (Vol) Signal Level (Voh) Duty cycle 2.4 45 55 15 0.4 Min Typ HCMOS Max Units pF VDC VDC % Condition with Vs=3.3V and 15pF load with Vs=3.3V and 15pF load @ (Voh-Vol)/2 Frequency Tuning (EFC) Parameter Tuning Range Tuning Range 5.0 1.0 Linearity Tuning Slope Control Voltage Range 0.0 1.4 10% Positive 2.8 VDC with Vs=3.3V Min Typ Max 12 3 Units ppm ppm Condition with AT cut Crystal with SC cut Crystal Fixed OCXO; No adjust htttp://www.vectron.com Vectron International*267 LowellRoad, Hudson, New Hampshire 03051*Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG * Landstrae, 74924 Neckarbischofsheim, Germany * Tel: +49 7268 801 100 OX-500 page: 2/5 Options5 Additional Parameters Parameter Phase Noise3 Min Typ Max - Units dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz g 1 10 100 1 10 Hz Hz Hz kHz kHz Condition @ 10 MHz Weight Processing & Packing 6.0 Handling & Processing Note Absolute Maximum Ratings Parameter Supply voltage (Vs) Output Load Operable temperature range Storage temperature range -55 -55 Min Typ Max 5.5 50 +85 +125 Units V pF C C Condition with Vs=3.3VDC Notes: 1 Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2 Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25C) 3 Phase noise degrades with increasing output frequency. 4 Subject to technical modification. 5 Contact factory for availability. htttp://www.vectron.com Vectron International*267 LowellRoad, Hudson, New Hampshire 03051*Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG * Landstrae, 74924 Neckarbischofsheim, Germany * Tel: +49 7268 801 100 OX-500 page: 3/5 Enclosure OX-500 Height "H" 9.5 Pin Length "L" 5.85min. Pin Connections 1 Electronic Frequency Control Input (EFC) 7 Ground (Case) 8 RF Output 14 Supply Voltage Input How to order this product: Use this worksheet to forward the following information to your factory representative : Model OX-40X Height 0 - Supply Voltage Code B RF Output Code A Temperatur Range E - Stability 108 Frequency Control 0 - Frequency 10MHz Model Code: 500: THT Version Height: 0: 9,5 mm Supply Voltage Code: D: 5V E: 3,3 V RF Output Code: A: HCMOS Frequency Control: 0: No Tuning 1: 5.0...12 ppm 2: 1.0...3.0 ppm Temperature Range: E: -40...+85C J: -20...+70C P: 0...+50C Stability Code: 258: 25ppb 508: 50ppb 107: 100ppb 257: 250ppb htttp://www.vectron.com Vectron International*267 LowellRoad, Hudson, New Hampshire 03051*Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG * Landstrae, 74924 Neckarbischofsheim, Germany * Tel: +49 7268 801 100 OX-500 page: 4/5 |
Price & Availability of OX-40X0-DAE-2582-10
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |